Equipments
Standard Equipments
- Machine body is steel (St-52) construction
On PRO 60-80 rolls are driven by electric motor + Planetry gearbox and gears - On PRO 60-80 guide rolls are in one direction manual adjustable* Horizontal and vertical working
- Torque limiting device protecting from overload during bending
- Lower rolls hydraulic moveable up and down
- Digital display for lower rolls* Separate and moveable control panel* Electrical and hydraulic protection against overloads
- Hardened rolls
- Shafts made of special steel (42CrMo4), hardened and grounded
- Manual lubrication
- 400 Volt/50 hz
- Instruction manual
- Suitable for "CE"
Optional & Special Equipments
Special rolls for tubes, profiles and angles* Digital display for hydraulic guide rolls* For PRO 80 hydraulic adjustable guide rolls in two directions* PRO 60 and PRO 80 Mechanical adjustable guide rolls for angle profiles* Variable speed of rotation* Motors in variable volt and frequency* NC Playback Control System* CNC Graphic Control System* Digital Readout for profile position indication
Explanations
- Standard Rolls
- Special Rolls
- Pulling Device
- For Bending without deformation and for Serial Production Special Rolls are requested
- Angle Device
- Pulling Devices
Notes
Data Based upon Steel 240 N/mm2 Yield Point All Specifications are Subject to Change without Prior Notice.
Specification
| Hydraulic Profile Bending Machine | ||||||
|---|---|---|---|---|---|---|
| Profile | PRO-60 | PRO-80 | Rolls | |||
| Dimen. in MM | Dia | Dimen. in MM | Dia | |||
| 1 |  |
30x30x3 | 250 | 35x35x3 | 500 | AF |
| 50x50x5 | 500 | 70x70x8 | 1200 | |||
| 80x80x8 | 1600 | |||||
| 2 |  |
30x30x3 | 400 | 40x40x4 | 600 | AF |
| 40x40x5 | 600 | 70x70x9 | 1000 | |||
| 50x50x6 | 1000 | 80x80x8 | 2000 | |||
| 3 |  |
30x30x3 | 300 | 70x30x4 | 400 | A |
| 600 | 70x70x8 | 1000 | ||||
| 80x40x7.5 | 1000 | 80x80x8 | 1400 | |||
| 4 |  |
30x30x3 | 300 | 30x30x4 | 400 | A |
| 50x50x6 | 600 | 70x70x8 | 1000 | |||
| 70x35x6 | 1000 | 80x80x8 | 1400 | |||
| 5 |  |
40×10 | 220 | 40×10 | 300 | A |
| 60×20 | 500 | 80×25 | 700 | |||
| 80×25 | 2100 | 100×20 | 2100 | |||
| 6 |  |
50×5 | 200 | 50×10 | 260 | A |
| 80×16 | 400 | 80×20 | 400 | |||
| 80×20 | 1200 | 120×30 | 600 | |||
| 7 |  |
15 | 300 | 30 | 300 | A |
| 30 | 600 | 40 | 500 | |||
| 35 | 1400 | 45 | 1000 | |||
| 8 |  |
20 | 300 | 35 | 300 | B |
| 35 | 600 | 50 | 500 | |||
| 40 | 800 | 60 | 1000 | |||
| 9 |  |
25×1.5 | 300 | 40×2 | 400 | B |
| 60×2 | 800 | 100×2 | 2400 | |||
| 70×2 | 1600 | 100×3 | 3000 | |||
| 10 |  |
26.5×2.3(3/4") | 200 | 48.3×3.2(1.5") | 400 | B |
| 48.3×2.9(1.5") | 600 | 88.9×3.2(3") | 1000 | |||
| 60.3×3.2(2") | 1000 | 88.9×4(3") | 1600 | |||
| 11 |  |
30×15.15 | 300 | 50x25x2 | 600 | AD |
| 60x30x2.5 | 2000 | 80x40x5 | 2000 | |||
| 80x30x3 | 6000 | 100x40x3.2 | 3000 | |||
| 12 |  |
30x20x2 | 240 | 40x40x2.7 | 500 | AD |
| 50x50x2.5 | 1600 | 70x70x3.2 | 1600 | |||
| 60x60x3 | 4000 | 70x70x4 | 3000 | |||
| 13 |  |
30x15x4 | 300 | 60x30x6 | 400 | AD |
| 60x30x6 | 400 | 120x55x6 | 800 | |||
| 80x45x6 | 800 | 140x60x7.5 | 1200 | |||
| 14 |  |
30x15x4 | 300 | 60x30x6 | 400 | AD |
| 50x25x5 | 500 | 120x55x5 | 800 | |||
| 80x45x6 | 100 | 140x60x7.5 | 1200 | |||
| 15 |  |
INP 120 | 500 | AD | ||
| Motor Power | 4.00+0.75 KW | 5.50+1.50 KW | ||||
| Rolls | 177MM | 245MM | ||||
| Shaft Diameter | 60/60 MM | 80/80 MM | ||||
| Bending Speed | 6.4 M/MIN | 4.2 M/MIN | ||||
| Weight | 1080Kgs. | 1600Kgs. | ||||
| Dimensions(W x L x H) | 940x1260x1390mm | 1040x1375x1540mm | ||||
